12,000+ Tesla owners have installed ProGuard
TeslaSpot™ ProGuard — Premium Noise Reduction & Weatherproofing Kit
TeslaSpot™ ProGuard — Premium Noise Reduction & Weatherproofing Kit
Couldn't load pickup availability
Safe and Secure Checkout
TeslaSpot™ ProGuard — Premium Noise Reduction & Weatherproofing Kit
What sets ProGuard apart
Measured results, a model-specific fit and 3M™ adhesive.
Measured in-cabin at highway speed, before vs. after install. Results vary.
ProGuard vs generic strips
| ProGuard | Generic strips |
|---|---|
| Measured 8 dB quieter cabin | No measured result |
| Pre-cut for your exact model & year | Universal, cut to fit |
| 3M™ industrial adhesive | Adhesive quality varies |
Love your Tesla — but not the wind noise?
It's not your car. It's the gaps.
With no engine to cover it up, you hear everything else: wind whistling through the door gaps and road roar at highway speed.
ProGuard seals those gaps with pre-cut EPDM strips made for your model. In our test, cabin noise dropped by 8 dB — so music, calls and conversations come through clearer. Dust and water stay out too.
Where ProGuard goes
- Front trunk (frunk)Cuts air flow and road noise from the front
- A-pillarsThe #1 source of wind hiss at speed
- B-pillarsSeals the gap between front and rear doors
- Front doors, left & rightSeals the gap between the door and the body
- Rear doors, left & rightQuieter ride for back-seat passengers
- Rear trunkLess road roar and dust from the rear
What's in the box
Questions? We've got answers
Will it fit my car?
Yes, if you pick your model and year above. Each kit is made for a specific Tesla model. Not sure which year you have? Email us your VIN and we'll check.
Is it hard to install?
No experience needed — installation tools are included. Clean the surface, peel the backing and press the strip into place using the included guide. Most people finish in 30–90 minutes.
Will I hear a difference?
In our own test with a sound meter, cabin noise at highway speed dropped by about 8 dB after install. The biggest difference is wind hiss from the door gaps. Results vary by car and road — and if you're not happy, you're covered by our 30-day return policy.
Will the strips stay in place?
Yes, if the surface is prepared. Clean each spot with rubbing alcohol, let it dry, press the strip firmly along its full length and skip car washes for 24 hours. Install at room temperature, not in the cold.
Does it change how my Tesla looks?
No. The strips sit inside the door, trunk and hood gaps, so they're hidden when everything is closed.
Do I need to drill or modify anything?
No. ProGuard attaches with adhesive only — no drilling, cutting or removing factory parts.
Will it affect my Tesla's warranty?
ProGuard doesn't change, replace or drill into any factory parts — it simply adds an extra seal on top. If you have a specific warranty question, check with your Tesla service center.
Can I remove it later?
Yes. Peel the strip off slowly — warming it with a hair dryer makes it easier. Any adhesive left behind wipes off with an automotive adhesive remover.
How long does it last?
The strips are made from EPDM rubber, the same type of material used for automotive seals, which handles heat, cold, rain and UV. A clean, dry surface during install is the key to a long-lasting bond.
How long does shipping take?
Shipping is free. Delivery to the US takes 4–15 business days, and you'll get a tracking number by email as soon as your order ships.
What if it doesn't work for me?
Contact us at support@teslaspot.com within 30 days of delivery and we'll sort it out. See our Refund Policy for details.
Try ProGuard in your own car. If it's not right for you, contact us within 30 days of delivery and we'll make it right.
